After having your windows tinted you know that eventually the tint will peel or bubble. Whether or not this is a bad job is determined by the length of time that it lasts. Window tint that has been improperly applied might peel or bubble easily. If you’re doing something for the first time, you’re more likely to make a mistake than not. 

What is the average life expectancy of tinted windows? 

There are a number of variables that affect how long you can anticipate your tint to last before it needs to be reapplied: 

The film stock that was employed. Despite its low cost, simple coloured film may only last a few months. The lifespan of a hybrid film containing both fading and reflecting metals is between four and five years. A decade-long life span is possible for pricey window film that is manufactured in a vacuum chamber. When selecting window film, keep in mind how long you intend to keep the movie. Due to the amount of metal in some hybrid films, they may interfere with cell reception. 

The calibre of the work performed during installation. A well-done professional installation is more likely to last than a DIY effort. 

Your area’s weather. Cooler, cloudier climates have better luck with window tint longevity. If you reside in a desert, the frequent exposure to the light will shorten the life of your window tint. If you’re not sure what to expect, talk to your installer or neighbours. Because the tint is applied to the interior of the window, rain or snow cannot harm it.


Yes, and sometimes no, too. Take it back to the installer if you had a professional job done and the warranty is still active. You can try to fix it yourself if you did it yourself, but keep in mind that your repairs may be of inferior quality if you did a poor job the first time. There is no guilt in not being able to properly apply window tint, as it requires a lot of care and attention to detail. 


The peeling window tint Oceanside could necessitate a new application. Rinsing it with soap and water and then re-applying it, being careful to smooth out any bubbles along the way, can often fix the problem. However, cutting a square around the injured region using a razor blade is preferable. Then use a thin mist of water to remove the area, being sure to remove both layers as you go. Cut a new part approximately an inch larger and moisten the window before reapplying it. It goes without saying that you should re-use the tinting film that you initially used. 


Apply distilled water to the margins of the wrinkled region, then use a razor blade to carefully pull it from the window. Spray water on both the film and the glass after pulling back the wrinkled region. Squeegee the film back onto the glass, starting from the inside and working outwards. For an hour, let it dry. You should use the same procedure to replace the damaged region in the event that this fails or the film is too damaged to lift without cutting or ripping it. 

What will happen to the bubbles in tint? 

Tinting bubbles are ubiquitous, but they’re not necessarily a bad thing. These tiny bubbles should dissipate after a few weeks and disappear completely. If you live in a cold climate, they may take longer to disappear than if you live in a hot climate. They won’t go away if they’re enormous or if they’ve established in an older shade of colour. Remove troublesome bubbles by gently poking them with a pin or sewing needle and then stroking them away with the back of a credit card. 

If your tint is constantly bubbling, it’s time to have it re-tinted. A professional who has greater experience applying film uniformly may be a better choice if you keep running into bubbles while trying to install your own tint. 

What is the best way to get rid of the tint on my windows? 

When a window tinting job goes horribly wrong, the only solution is to tear it out and start over. In order to keep your car’s windows tinted for an extended period of time, it is necessary to remove the tinting film. 

To accomplish so, cut a black (not white) rubbish bag somewhat larger than the window’s dimensions. Spray the window with water, then place the bag over it. The bag needs to stick to the ground. 

Use a tarp or a huge towel to protect the interior of the vehicle. Spray ammonia on the inside of the window after that. Leave the car out in the sun for an hour to dry out. If possible, do this outside on a sunny day. Then carefully remove the tint off of the glass. A razor blade is a good place to begin. The ammonia can be reapplied after thirty minutes if necessary. 

Finally, thoroughly clean the windows. 

Of course, the best strategy is to steer clear of subpar tinting in the first place. Despite the fact that many people are able to tint their own windows using a kit, the process is not simple. As a result, you won’t be able to build up the same level of expertise as a professional who install window tint on a daily basis. Most people prefer to have a professional apply the tint for them. If you’re looking to tint your windows, go for one that uses high-quality film and discuss your specific needs with the installer (also, make sure to check the law in your state about how much tint is allowed, especially on the windscreen). 

The process of installing window tint just takes a few hours. Contact window tint Oceanside right now if you’re interested in having your car’s windows tinted.

Related Articles

Leave a Reply

Back to top button