Indoor air quality (IAQ) specialists and mold treatment contractors are available from companies whose primary emphasis is mold.
In most cases, mold testing isn’t required. You have a mold problem if you can see and smell mold in your home. mold is frequently an indication of a more significant issue, including insufficient ventilation and moisture buildup. Mold is more likely to grow in homes with a lot of moisture (also known as “high relative humidity”) or standing water.
You may need to contact a consultant or a home performance specialist if you have an issue with high humidity or stagnant water. Home Performance Consultants conduct indoor air quality (IAQ) examinations. They can identify structural faults that may be creating mold problems (such as ice dams, moisture, and heating and cooling complaints). They can assist you in determining why mold is forming in your house and what steps you should take to prevent it.
Here are several mold-focused IAQ consultants and mold remediation CT companies:
Consultants in Indoor Air Quality (IAQ) Consultants in Indoor Air Quality (IAQ) Consultants in Indoor Air Quality (IAQ Contractors who specialize in mold remediation
Many mold inspection and cleanup experts and contractors are honest, dependable, and knowledgeable. Here are some ideas for finding reputable consultants and contractors.
- Obtain many estimates. Make sure that everyone is bidding on the same work. Rather than issuing a phone estimate, make sure the contractor arrives at the job site. Be wary of a ridiculously low estimate. Be wary of a contractor or consultant who employs SCARE methods to get you to do more work than you need.
- Request the names of recent clients and follow up with a phone call to determine if they were satisfied. Would they enlist the contractor’s services again?
- Obtain a copy of the inspection report. Was there a report of all the places investigated, the reason for the mold growth, how to deal with the problem, and any sample results? Did the contractor arrive on time, clean up after himself, and provide warranty follow-up?
- Mold cannot be removed from a structure. Avoid hiring a contractor who promises to eliminate all mold in your home.
- Due to a potential conflict of interest, the company that performs the inspection or air sampling should not be financially connected to the company that conducts the mold remediation. Consulting firms with a financial relationship with a contractor should disclose that relationship before entering into a contract. In the end, it is the property owner’s responsibility to inquire about such a relationship.
- Choose a laboratory that has been certified by the American Industrial Hygiene Association (AIHA) or the United States Environmental Protection Agency (USEPA) (EPA).
- The fact that a company’s name appears on the Department of Health Services (DHS) list of Indoor Air Consultants or mold Remediation Contractors does not imply that the company or its capabilities are endorsed. It also doesn’t mean favoritism toward companies that aren’t mentioned. These lists were produced from information submitted by contractors and consultants to DHS about the training they have received.
The lists are intended to help folks looking for these specialist services but don’t know where to start. Use this quiz to assist you in locating the best one for you!
- Will you be the one to conduct the mold testing?
- As a result, we started with a trick question. A cleanup company that wishes to test its work should be avoided. It could lead to a conflict of interest. On the front end of a job, they may mislead you into thinking a situation is more complicated than it is, resulting in a false requirement for their services. They are essentially evaluating their test on the rear end of work. Neither position is ideal. To avoid this, we strongly advise that a professional, independent third party perform pre-and post-testing verification on mold jobs.
- What are your credentials?
It is not sufficient to watch 20 minutes of YouTube videos on “Mold Cleanup” to be qualified to undertake mold remediation. Is it rocket science? No, but there are a lot of liability and standards-of-care considerations at play. Look for credentials from reputable organizations like the IICRC and the RIA. Continuing education is required for qualified mold remediation contractors in addition to formal multi-day training.
- Who is going to do the service?
It’s critical to discuss the qualifications of the mold treatment professionals executing the work with the potential mold remediation contractor. Many companies are certified to undertake mold remediation due to a broad or umbrella certification (i.e., franchises). At least one certified mold remediation technician should be in charge of the job site and supervise it.
- Is it okay if I take a peek at your insurance certificate?
Any contractor doing work on your house, including mold treatment, should provide you with a certificate of insurance. Is the mold treatment company insured, or are they just a general contractor or handyman? mold cleanup is not covered by public liability insurance. Request a copy of their certificate’s “pollution liability” coverage.
- What is your method of remediation?
Mold treatment can take numerous forms, depending on a variety of factors. What kind of material, for example, is affected? Porous materials like carpeting and sheetrock require a different treatment than semi-porous or non-porous materials like wood or metal. Regardless of the factors, you should pay attention to the following critical aspects of the process: Containment and engineering control to avoid cross-contamination, as well as mold removal strategies for personnel and building occupants.
- How do I know the mold won’t come back?
Moisture, food, and time are all necessary for mold to flourish. Moisture is the only thing we can hope to regulate. A professional mold remediation contractor should be able to help you determine the source of the extra moisture if it isn’t already known. Along with the mold removal issue, the problem (inadequate ventilation, leaking pipe, etc…) should be addressed. The case should not reoccur if the moisture problem is rectified and the mold is eliminated.
- What type of craft warranty do you provide?
Do you know what the “tail light guarantee” is? Until you see their tail lights as they drive away, the service is guaranteed. This is unacceptable. A professional mold remediation company should provide at least a two-year craftsmanship guarantee on their work. When the property is sold, it should be transferable to the new owners.